Stainless Steel Alloy AISI 418, also known as Greek Ascoloy, is part of the martensitic family of stainless steels specifically formulated for forming into wrought products. Properties are appropriate for the heat treated (HT) condition, it has a fairly high base cost among wrought martensitic stainless steels, demonstrates fairly high tensile strength and a moderately high embodied energy. Alloy 418 also shows good corrosion resistance, high hardness, toughness and strength.
Stainless Steel product forms offered at all 91pro视频鈥� locations:
Stainless Steel Alloy 418 Applications:
- Ducts
- Stiffeners
- Exhaust struts
- Engine braces
- Turbine exhaust components
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C 0.15 鈥� 0.20% | Cr 12.0 鈥� 14.0% | W 2.50 鈥� 3.50% | Ni 1.80 鈥� 2.20% | P 0.04% Max | |||||
| S 0.03% Max | Si 0.50% Max | Mn 0.50% Max | Fe Balance | ||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density
(lb/ft3) |
Electrical conductivity
(% IACS) |
Thermal conductivity
(叠罢鲍/丑-蹿迟-掳贵) |
Specific heat capacity
(叠罢鲍/濒产-掳贵) |
Thermal expansion
(碌尘/尘-碍) |
||
| 500 | 2.8% | 15 | 470 | 10 | ||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 鈥� | 105 | |||||||
| Tensile Strength Range (Rm) (ksi) | 鈥� | 130 | |||||||
| Elongation (AL=5 x 脴) | 鈥� | 15.0% | |||||||
| Hardness, Rockwell (C) | 鈥� | 25 | |||||||
| Modulus of Elasticity (ksi) (MPa): 30457 | |||||||||
| Machineability General Index: 鈥� | |||||||||
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM鈥檚 across Aerospace, Medical, Industrial, and Oil and Gas markets.