Ti Grade 6Al-4V ELI Grade 23 is produced at a higher purity than Titanium 6Al-4V Grade 5. Though this alloy is mainly recognized as the best dental and medical Titanium grade, it is also widely used in applications when there is a need for toughness, high strength, light weight, and good corrosion resistance.
Because of these unique biocompatibility characteristics, Titanium 6Al-4v ELI Grade 23 is also used in bio-medical applications, implants, and similar surgical procedures and situations.
Titanium 6Al-4V ELI Grade 23ÌýSpecifications:
Titanium 6Al-4V ELI Grade 23 Round Bar
- AMS 2631, AMS 4930, AMS 6932, EN 10204 3.1, MIL-T-9047
- ASTM B348 Gr 23, ASTM F136
Titanium 6Al-4V ELI Grade 23 Rectangular Bar
Titanium 6Al-4V ELI Grade 23 Applications:
- Aircraft Applications
- Bone Fixation and Similar Devices
- Cryogenic and High Pressure Vessels
- Ligature Clips
- Marine and Salt Water Applications
- Orthopedic Cables, Pins, and Screws
- Orthodontic Appliances
- Surgical Implants, Joint Replacements and Staples
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
Chemical Composition | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Ti 88.09 – 91% | Al 5.5 – 6.5%% | ÌýV 3.5 – 4.5% | Ìý¹ó±ð | Ìý°ä | |||||||
N | Ìý±á | ÌýOther, each | ÌýOther, total |
PHYSICAL PROPERTIES | ||||||
---|---|---|---|---|---|---|
Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
0.160 | 0.97 | 46.5 | 560 | 0.00000478 | 3200 |
Mechanical Properties | |||||||||
---|---|---|---|---|---|---|---|---|---|
Property | Minimum | Maximum | |||||||
Yield Strength Range (Rp0.2 Offset) (ksi) | 120 | 160 | |||||||
Tensile Strength Range (Rm) (ksi) | 125 | 174 | |||||||
Elongation (AL=5 x Ø) | 10.0% | 18.0% | |||||||
Brinell Hardness (H) | 326 | 379 | |||||||
Modulus of Elasticity (ksi) (E): 16500 | |||||||||
Machineability General Index: 21% |